3. Large size LCD screen, high brightness backlight
4. Two temperature units of Celsius and Fahrenheit can be selected
5. Automatic shutdown and energy saving
6. Clean and sanitary, non-contact forehead temperature measurement, measuring distance 1-3cm, no contact with human skin, to prevent cross infection
7. One key measurement
8. Multiple groups of memory can store 10 groups of measurement data for analysis and comparison.
1.Installing the battery
1) Push the battery door downward and backward, install 2 batteries No.7, and cover the battery cover. Please check the positive and negative signs in the battery during installation, and note that the positive and negative poles of the battery cannot be installed reversely.
2. Switch temperature measurement mode
In the power on state, press the mode key to switch the temperature measurement mode (adult frontal temperature mode by default). Switching order: adult frontal temperature → physical temperature mode
This product provides you with the temperature measurement method of forehead temperature, but it can't replace the doctor's diagnosis and treatment. In addition, the individual's temperature is different. Please use the memory function to understand your daily temperature, and use this as a reference for whether the temperature rises.
1) The thermometer shall be pointed to the center of the forehead - above the eyebrow center and kept vertical. The measurement part shall not be covered by hair. The distance between the thermometer and the forehead is recommended to be 1-3cm. The ear temperature mode is cancelled in the current version. Please do not remove the head cover for test.
2) Press the measurement key to start up
Note 1: body temperature mode is the default mode---
Note 2: after the machine is started, the thermometer will automatically carry out
Self check, if there is an error, please take out the battery and install it again, then turn on the machine.
3) Press the alignment part once. After about 2 seconds, the measurement results will be displayed on the thermometer screen.
4) Automatic shutdown: automatic shutdown after no operation for about 20 seconds.Before measurement, please confirm that the measured object has not bathed or exercised within 30 minutes and has been kept in the temperature environment for at least 5 minutes. Three measurements are recommended. If the three measurements are different, select the highest temperature value.