Sensitive photoelectric sensor detects smoke, even prior to the onset of dangerous flames and heat; loud 80-decibel fire alarm tone provides warning to escape.
Enhanced performance and earlier hazard warning compared to most non-photoelectric sensor devices.
Test/reset button for simple testing; unit automatically resets following dispersal of smoke hazard; blinking LED indicates ready mode.
Non-Replaceable CR123A Lithium Battery of this smoke alarm boasts a lifetime of up to 10 years in the standby condition.
Comes with a mounting bracket, 2 screws and 2 anchor plugs, and can be easily installed in houses, apartments, mobile homes and dormitory rooms.
Protect Yourself, Your Family & Your Home from Fire:
Too many home fires result in loss of life because victims did not have ample warning to escape to safety. HEIMAN Battery-Powered Home Smoke Detector provides the warning needed: it emits a piercing fire alarm tone when smoke is detected by the photoelectric sensor, providing you and your loved ones warning to get to safety.
Photoelectric sensors offer superior smoke alarm performance: they operate by detecting the build up of smoke, which can occur prior to widespread outbreak of heat and flames during a home fire.
You always know the Battery-Powered Home Smoke Detector is on duty: the red LED indicator flashes once every 40 seconds to show ready mode. When activated, the fire alarm is an 80 dB distinct tone that can be heard throughout most houses, and beyond. When smoke hazard has passed, the device automatically resets to standby.
Simple Installation and Operation, Long-Lasting Battery Life:
Recommendation: Each bedroom/sleeping area in your home, the kitchen, and living room should have a smoke detector installed, as well as any rooms with an increased risk of fire danger.
Features:
(1) independent ceiling installation, installation is simple.
(2) Built-in dedicated IC, stable performance, high sensitivity
(3) the use of optical principle of the smoke detection chamber, can accurately detect the smoke generated early fire
(4) the alarm can be simulated alarm test
(5) comes with a buzzer, an independent alarm
(6) 3V CR123A Lithium Battery Sufficient For Approx 10 Year Battery Life.(Non-Replaceable)
(7) low voltage alarm function, when the battery voltage is lower than 6.8V, the beep to remind the user to change the battery
(10) protection area: alarm installation height of 6 meters below the protection area of 60 square meters
(11) Manual testing
(12) Automatic reset
(13) Size Dimension : 9.6cm x 4.1cm
Package:
1 X mounting bracket
2 X screws
2 X anchor plugs
1 X Smoke Detector (battery included
1 X instructions
Manufacturer Detials :
Shenzhen Heiman Technology Co., Ltd. Public Listed Company In China
Company Quality Management System Certification: ISO9001, ISO140001, OHSAS18001.
Shenzhen Heiman Technology Co,. Ltd , is a large-scale enterprise specializing in producing of various kinds of safety alarms. Established in 2005, they already have a wide range of experience in product design, certification and manufacture of different kind of alarms.
【WARRANTY】 60 month Warranty With 1 to 1 exchange.
Replacement subject to factory defects only and does not cover damages caused by misuse or abuse, dropped unit, submersion in water (flooding), fire, lightning, vandalism, accidents, human error or force majeure.
Customer have to arrange and ship back to us to verify before any replacement. If the unit is found factory defects the shipping fees for the replacement unit will be born by us.
(Customer need to keep all boxes and invoices for any future warranty claim - Invoice will be ship together with the product)
INFO Highlight
Loud continuous alarming
When the smoke alarm detects combustible products and goes into alarm mode, the pulsating alarm will continue until the air has cleared. For procedures on what to do when your alarm is in active alarm mode, go to What to do When Your Smoke Alarm Sounds.
If a false alarm is activated, one of the following may be the reason:
The battery may be loose or installed improperly
The smoke alarm sensing chamber may be dirty
Humidity, steam, or other environmental factors
An electrical condition may be causing power to the unit to be interrupted
The alarm may have reached its end of life
Consistent chirping
If a smoke alarm is chirping consistently, one of the following may be the reason:
The smoke alarm’s battery may need to be replaced. An alarm will chirp every 30 to 60 seconds for a minimum of seven days.
The smoke alarm may be malfunctioning. An alarm will chirp between flashes of the red LED light.
The Hush feature may be activated. An alarm will chirp every 30 to 40 seconds for approximately seven minutes while the Hush feature is activated.
The smoke alarm may have reached its end of life (sealed battery models only). An alarm will chirp every 30 seconds to indicate it is time to replace the alarm.
There may be interference from a similar system nearby (wireless alarms only).
Intermittent chirping (without a regular pattern)
If a smoke alarm is chirping intermittently, one of the following may be the reason:
The battery may be loose or installed improperly
The smoke alarm sensing chamber may be dirty
Humidity, steam, or other environmental factors
An electrical condition may be causing power to the unit to be interrupted
The alarm may have reached its end of life
How to Clean Your Smoke Detector
Once every six months, we recommend that you clean your smoke detectors. Cleaning your smoke detectors involves two activities: 1) vacuuming out the unit; and 2) wiping down the outside vents. To vacuum out the unit, you should follow your manufacturer's recommendations for routine cleanings.